Installing a door may look easy but small mistakes can create big problems. A poorly installed door can stick, not close properly or even get damaged over time. To help you avoid these issues, here are some common mistakes and simple ways to fix them.
1. Wrong Measurements
The Mistake:
If the door size is not correct, it may not fit properly. A door that is too big or too small can cause gaps, making it hard to open and close.
How to Avoid It:
✅ Measure the height and width of the door frame before buying the door.
✅ Check measurements at multiple points to make sure they are accurate.
✅ Leave a small gap around the door for proper fitting.
2. Uneven Floor Level
The Mistake:
If the floor is not level, the door may open or close by itself or not fit properly.
How to Avoid It:
✅ Use a leveling tool to check if the floor is even.
✅ If the floor is not level, use small wooden pieces (shims) to adjust the door.
3. Using Weak Hinges
The Mistake:
Cheap or weak hinges can bend over time, causing the door to sag. Also, placing hinges in the wrong position can make the door difficult to open.
How to Avoid It:
✅ Use strong hinges that can support the door‘s weight.
✅ Fix hinges at the correct height (one near the top, one in the middle and one at the bottom).
✅ Tighten screws properly so hinges do not become loose.
4. Over-Tightening or Loose Screws
The Mistake:
- If screws are too tight, the door material may crack.
- If screws are too loose, the door may shake or come off.
How to Avoid It:
✅ Use the right size screws for the door.
✅ Tighten screws just enough to keep the door firm.
5. Not Leaving Enough Space Around the Door
The Mistake:
If there is too little space, the door may stick when opening. If there is too much space, air and dust can enter the room.
How to Avoid It:
✅ Keep a small gap (1/8 inch) on the sides and top of the door.
✅ Leave a ½-inch gap at the bottom for smooth movement.
6. Installing the Door in the Wrong Direction
The Mistake:
Sometimes, people install doors backward or make them open in the wrong direction.
How to Avoid It:
✅ Before installing, check which way the door should open.
✅ Make sure there is enough space for the door to swing properly.
7. Not Fixing the Door Frame Properly
The Mistake:
If the door frame is not secure, the door may become loose or tilt over time.
How to Avoid It:
✅ Use strong screws to fix the frame tightly.
✅ Use wooden pieces (shims) to keep the frame straight.
✅ Check that the frame is level and even before final tightening.
8. Forgetting to Test the Door
The Mistake:
Some people finish the installation without checking if the door works properly. Later, they realize the door is stuck, noisy or uneven.
How to Avoid It:
✅ Open and close the door multiple times before finishing.
✅ Check if it moves smoothly and closes properly.
✅ If you notice any issues, fix them immediately.
Avoiding these mistakes will help you install a door that fits well, works smoothly, and lasts longer. Proper planning and careful installation can save time, effort, and money in the long run.
If you need strong and stylish wooden doors, check out Kavish Doors for the best quality doors at great prices!
Need Help Choosing the Right Door?
📞 Call us at +91 62 067 04205
🌐 Visit: www.kavishdoors.com
